Microgrid Solar Power Energy Storage System Product 90kwh 100kwh 110kwh 120kwh Outdoor Battery
Product description:
The whole system is plug-and-plav, easy to be transported, installed and maintained. it is an one-stop integration systemand consist of battery module, PCS, PV controler(MPPT) (optional), control system, fire control system, temperaturecontrol system and monitoring system. The synergy of the system components can achieve effective charging anddischarging. lt adopts AC coupled micro-grid structure, PcS, load, grid, and access to AC bus, and the correspondingcontrol strategy is developed according to the actual case to ensure the safety of power supply.
The battery cluster consists of modules connected in series, and the whole battery system is controlled by BCM tomonitor the cluster voltage and current in real time. The battery module consists of LiFePo4 battery cells. lt adoptsdistributed BMl control system with functions of collecting the battery voltage, battery temperature and batteryequalization to ensure the module works effectively and safely.

Product parameter:
PRODUCT PARAMETERS |
Model | EnerArk2.0-30P |
Battery parameters |
Cell Type | LFP-280Ah |
Module Model | IP20S |
System Configuration | 1P100S~1P160S |
Battery Capacity(BOL) | 89kWh~143kWh |
Battery voltage range | 280V-576V |
AC on-grid parameters |
Grid Type | 3P4W |
Rated charge/discharge power | 30KW |
Rated grid voltage | AC400V |
Grid Voltage range | -15%~+15% |
Rated grid frequency | 50Hz |
Frequency range | ±5Hz |
Rated current | 43A |
Power Factor | 0.8(Leading)~0.8(Lagging) |
Output Harmonics(Rated power) | ≤3% |
General parameters |
Dimension (W*H*D) | 1500*2100*1230mm |
Max Weight | 2000kg |
IP Protection Rating | IP54(Battery room) IP54(Electrical room) |
Seismic Intensity Rating | 8 degree(IEC60980) |
Anti-corrosion grade | C3 |
Operating temperature | -20℃~50℃ |
Relative Humidity | 0-95%(Non-condensing) |
Altitude | <2000m |
Cooling method | Battery room: air conditioning Electrical room: forced air cooling |
Noise | ≤75dB |
System efficiency | ≥85% |
Cycle life | 10years or> 6000cycles |
Fire fighting System | Automatic fire extinguishing |
Fire extinguishing media | FM200 |
Communication Interface | RS485,Ethernet |
Communication protocols | Modbus RTU,Modbus TCP/IP |
Warranty | 5years |
Product features:
1) High-performance LiFePo4 battery to ensure high safety and reliability for energy storage2) lntelligent temperature control to ensure the optimal temperature environment and lower systempower consumption.
3)Real-time data backup.
4) Automatic fire fighting system with high safety.
5) Patented design with pressure relief and flame arrest.
6) One-button start, automatic operating and it support multiple parallel connection.
7)Protection class lP55, suitable for outdoor use.
8) Four layers of safety protection design for higher safety and reliability9)Remote viewing service.